Search

Share on social networks:

     



Follow us on Twitter:

Latest ideas (click to enlarge)

Welcome to Expert-Furniture web site. Basement remodeling.


Basement remodeling
Click on image to enlarge
Garden remodeling

basement remodeling

basement remodeling ideas.

In a cottage in the absence of insulation on the perimeter of the basement, up to 20% of all heat loss can come to the area of the heated basement. All other things being equal, the most advantageous overall external insulation basement (insulation of the perimeter). If the insulation is located entirely outside waterproofing then herself waterproofing and architectural elements are additional long-term protection against mechanical and thermal stresses.

Drainage
If insulation is required, along with drainage of the soil around the building, then one possible solution may be the use of nonwoven geotextiles. Application of thermal insulation (if necessary - with additional drainage) should not only when building houses, but also in the construction of apartment buildings, office and industrial buildings with heated basement, even if the proportion of heat loss through the basement of the total balance is relatively low. Exterior basement walls is economically feasible even if the exploitation of space is not planned immediately after completion.

Materials made of extruded polystyrene foam are used to insulate the perimeter for more than 20 years. It should be understood that under the perimeter of the building are those of its elements (walls and floor), which are in contact with the ground. Long-term studies confirm the effectiveness of their use in extreme operating conditions. Currently, more and more architects and builders are attracted by the dignity of the developed system for the perimeter, including the device insulation and mechanical protection of the exterior walls of basements. Extruded polystyrene is especially advantageous to use for the perimeter zone, where the elements of the building as a result of contact with the ground must meet very strict requirements for water resistance, insulation, aging resistance, strength, resistance to cycles of freezing - thawing. Due to the closed cellular structure of extruded polystyrene foam boards have a number of advantages:

  • Low thermal conductivity
  • High compressive strength to resist the considerable pressure of the soil and use the material on a large deep-seated
  • Dimensional stability
  • Immune to moisture and the almost complete absence of water absorption
  • Not being of the aging process
  • Ease of processing.

 
Bathroom

Basement remodeling

The products made of extruded polystyrene foam are firm at depth more than 20 ft. (depending on brand) and if there is a prolonged contact with water under pressure. If the exterior basement walls need only insulation, and drainage is not required or is made by usual methods (eg, through the filter layer of gravel), then the most effective thing is using the extruded polystyrene board over the waterproofing, which provides additional mechanical protection.

It is recommended to warm basements with extruded polystyrene foam followed by plastering on the grid. Embossed surface of the board promotes better adhesion of plaster. When the device insulation base plate extruded polystyrene is placed directly on the net leveling layer plastic film and covered with overlap at the edges. If the insulation strength under compression considerations are particularly of high demands, we recommend to choose the appropriate grade insulating plates. The insulation boards can be found directly in the formwork using hydraulic concrete.

More pictures: 1 2 3 4 5